HOME
Capabilities About Us Services Case Studies Technology Papers

Past Events

  • IWLPC 2008

    International Wafer Level Packaging Conference
    October 13 - 16, 2008
    Sna Jose, CA. USA
    www.iwlpc.com/smtai
  • SMTAI 2008

    Surface Mount Technology Association International
    August 17 - 21, 2008
    Orlando, Florida, USA

    Tutorial Details:
    T17 Advanced Flip Chip Technology and Processing
    Dan Baldwin,Ph.D., Engent,Inc.
    Monday, August 18
    1:30pm – 5:00pm

    What You Will Learn
    Flip chip assembly technology is gaining increased acceptance in the electronics industry. Annual growth rates projected through the next decade are 40% or higher. While flip chip technology was developed over thirty years ago by IBM and has been in production on ceramic substrates, it has yet to achieve cost competitiveness with high volume semiconductor packaging and low cost surface mount technology. In order to achieve cost competitiveness, new and innovative material systems and process technologies are required.
    This course will present advanced flip chip process technology focusing on first pass yield, throughput, and cost. The course includes extensive handouts covering advanced flip chip process technology and materials. Flip chip processing of solder interconnect systems, conductive adhesive interconnect systems, thermosonic interconnects, and thermocompression interconnects will be presented. In addition, key processing elements such as underfill processing, reliability, and failure analysis will be presented. The relationship between process induced defects and flip chip reliability will be discussed. A comprehensive process characterization, reliability analysis, and failure mode analysis will be presented.

    Who Should Attend
    Individuals associated with advanced surface mount assembly, bare die module assembly, and advanced electronics packaging are encouraged to attend, specifically, the following: managers, manufacturing, quality, design, and packaging engineers who are challenged to solve tomorrow’s process solutions and next generation packaging problems.

    Topics Covered
    Flip chip technology Flip chip process fundamentals Advanced flip chip process technologies Flip chip processing with no flow underfill 3D wafer level flip chip processing Flip chip processing based on fast flow snap cure underfills Fluxless flip chip process technology Lead-free solder flip chip processing Flip chip processing with reworkable underfills Conductive adhesive interconnect systems and processing Flip chip process implementation Reliability analysis and failure modes
    www.smta.org/smtai
  • ECTC 2008

    58th ECTC | Electronic Components and Technology Conference
    May 27-30, 2008
    Lake Buena Vista, Florida , USA

    Paper Presented: 3D-WLCSP package technology – Processing and Reliability Characterization

    www.ectc.net
  • IMAPS 2005

38th IMAPS International Symposium on Microelectronics
September 27 - September 29, 2005
Philadelphia, PA, USA
www.imaps2005.org
  • MEMS 2005

    18th IEEE International Conference on Micro Electro Mechanical Systems
    January 30 - February 3, 2005
    Miami Beach, Florida, USA
    www.mems2005.org
  • SMTA Academy and Certification Programs - NEPCON Texas

    October 20-21 at the Arlington Convention Center
    More Information
    Engent Keynote Address:
    New and Emerging Technologies
  • Electronics Assembly Technology Forum

    October 19th, 2004 Milwaukee Marriott West - Waukesha, Wi
    Presentation:
    Taking the Pain Out of Lead-Free
  • Hands On Lead-Free Technology Workshop

    October 13-14
    More Information
    Engent
    3140 Northwoods Pkwy
    Norcross, GA 30071
  • International Wafer-Level Packaging Congress

    October 10-12 at the Doubletree Hotel, San Jose
    www.smta.org
    Papers Presented:
    Wafer Level MEMS Packaging Strategies
    Yield Model for Assembly Process of Area Array Packages
  • Surface Mount Technology Association International

    September 26-30, Chicago, IL.
    www.smta.org
  • METRIC (MEMS Technology Roadmap and Industry Congress)

    September 18 - 19, 2003, Pittsburgh, PA
    Group 7: MEMS Reliability and Packaging Issues
    Goal: Discuss how packaging issues affect MEMS reliability. How is accelerated test challenged by packaging? What are the failure modes specific to packaging? How can they be better addressed?
    Moderator: Dan Baldwin, Engent, Inc
    www.memsindustrygroup.org
  • Flip Chip 2004

    June 21-24, 2004, Austin, TX
    Topical Workshop & Exhibition on Flip Chip Technology
    Sponsored by: IMAPS
    "Everything in electronics between the chip and the system!"
  • The 54th Electronic Components & Technology Conference

    June 1-4, 2004
    www.ectc.net
  • The 2004 National SBIR/STTR Conference And Small Business Tech Expo (SBTE)

    April 26-29, 2004
    Hilton Atlanta * Atlanta, GA
    www.sbirworld.com/ga

For more information about the events above please contact us at:

Phone: +1-678-990-3320
Fax: +1-678-990-3324
Email: sales@engentaat.com



HOME